2.2.33. SPN 1132, FMI 4, Intake manifold 1 air temperature sensor: Electrical signal below normal, possible reason is short to ground.ΒΆ

Description

The measured intake manifold 1 air temperature sensor signal is below the normal level (< 0,2V).

Possible causes are:

  • The intake manifold 1 air temperature sensor wiring is defective.
  • The intake manifold 1 air temperature sensor is defective.

Reaction in EEM

The FC is stored and the warning lamp is activated. Engine power is reduced (Degradation Level 1). The CAN message indicates an active fault.

Solution

First save the error log and then do the procedure that follows:

  • Examine the intake manifold 1 air temperature sensor wiring, the connectors and the contact surfaces of the connector pins (possible oxidation).
  • Try the operation with another intake manifold 1 air temperature sensor to see if the sensor is defective.

See Intake manifold temperature sensor for reference.