2.2.94. SPN 2791, FMI 11, EGR valve: Wrong angular span value measured during learnΒΆ

Description

The EGR actuator learn failed after power on. Actuator span is outside of the calibration window.

Possible causes are:

  • The EGR actuator control shaft is defective.
  • The EGR valve is stuck or the valve flap has loosened.
  • The EGR actuator is defective.

Reaction in EEM

The FC is stored and the warning lamp is activated. Engine power is reduced (Degradation Level 1). The CAN message indicates an active fault.

Solution

First save the error log and then do the procedure that follows:

  • Examine the EGR actuator assembly to see if the control shaft is defective.
  • Make sure that the EGR valve is not loose.
  • Examine the EGR valve to see if there is dirt between the valve flap and the turbo.
  • Test the operation with another EGR actuator to see if the actuator is defective.

See EGR actuator ( Exhaust Gas Recirculation) for reference.