4.2.231. SPN 520240, FMI 31, ECU 1 Injector bank 0 short circuitΒΆ

Description

The EEM4 monitoring system has detected more than one cylinder error. If a cylinder error occurs on one bank, a cylinder specific error is reported. If more than one cylinder error on one bank occurs at the same time, these errors are compiled automatically and are detected as a bank error.

Possible causes are:

  • The Fuel injector wiring is defective.
  • The Fuel injector is defective.

Reaction in EEM

The FC is stored and the warning lamp is activated. The CAN message indicates active fault.

Solution

First save the error log and then erase it. Restart the ECU after erasing the error log. If the fault occurs again during the next driving cycle, check the following paths:

  • Check the injector wiring, the connectors and the contact surfaces of the connector pins (possible oxidation).
  • Measure the injector low side to the engine ground, to see if there is a short circuit to bat.