3.2.495. SPN 84, FMI 4, Vechicle speed sensor short to GROUNDΒΆ

Description

The EEM4 monitoring system has detected a short circuit on the vehicle speed sensor.

Possible causes are:

  • The speed sensor wiring is defective. (Shorted to ground.)
  • The speed sensor is defective.

Reaction in EEM

The FC is stored and the warning lamp is activated. The CAN message indicates active fault.

Solution

First save the error log and then erase it. Restart the ECU after erasing the error log. If the fault occurs again during the next driving cycle, check the following paths:

  • Check the vehicle speed sensor connection to the EEM4, the connectors and the contact surfaces of the connector pins (possible oxidation).
  • Check the operation with another speed sensor to see if the speed sensor is defective.